N151.2 6mm 300 500 N123 400 Carbide Parting Insert Lathe Grooving Cut-off Blade Cutting

Products Description

​Advantages:

1. 100% Virgin Raw Material
2. German Dorst machine make perfect quality
3. Excellent wear resistance and good finishing
4. 3 times quality check before shipment
5. Sharp Edge and Durable
6. Smooth Chip Breaking
7. Improve production efficiency
8. Complete specifications

Specification:

Application:

Our N151.2 tungsten carbide grooving inserts adopts imported Dorst machine to ensure good stability of cutting edge, high precision, high hardness, good finishing, durable coating, stable performance and improves the working efficiency. N151.2 carbide groove insert is made of imported base material with advanced high precision, which enhances the quality of the blade, high hardness, good ductility, high finish, thick coating, stable performance and improves the processing efficiency; Unique coating process, fine and smooth, no drip marks, reduce surface friction, so that the cutting resistance is smaller; High precision blade, effectively reducing friction and loss; The N151.2 blade is sharp and thick, so that the cutting speed is fast but not easy to break. It has wide range of application, applicable to step surface processing, model profiling processing, grooving cutting, slope processing, and could to be processed alloy steel, soft steel, carbon steel, medium steel, stainless steel,cast iron, titanium alloy, etc.,

please send me your requirements to us, we will recommend the best suitable grade.

Details:

1. Our perfect edge treatment, every piece can stand the test.

2. Longer tools service life improve your working efficiency.

Company Profile

Hunan SPEED Carbide Tools Co.,Ltd is a professional manufacturer of Carbide inserts, including turning inserts, milling inserts, grooving inserts, threading inserts, U drill inserts, aluminum inserts and cermet inserts etc. Located in Zhuzhou Hunan, which is the biggest tungsten carbide tools city in China, near to ZCCCT. We provide various and efficient delivery ways. Our factory covers and area of 2,000sqm and has more than 100 staff members who are professional and willing to grow up with you.

Advanced equipments to ensure steady quality

1. We use imported German Dorst machine to produce, which with high precision and smooth surface.

Insepction conducted in all production procedure

2. Each piece will have 3 times quality check before shipment, to make sure stable quality.

Note:

1. Carbide N151.2 grooving inserts shall not be bumped or dropped on the ground and please be handled with care.

2. Before installing the N151.2 carbide grooving blade, please confirm the performance and use of operation table, and the cutting direction indicated by the arrow of the blade is consistent with the rotation direction of the operation table. Please pay attention to don't install in the opposite direction. The wrong installation direction may cause the blade serrations to fall off, in case of accidents.

3. After installation, it is necessary to confirm whether the center hole of the N151.2 carbide grooving blade is firmly fixed on the flange of the saw table. If necessary, put on a spacer, then, push it lightly by hand to confirm whether the blade rotates eccentrically.

4. When using, do not exceed the specified high speed.

5. When not using, please hang the N151.2 blades upright on a dry rack.

Common questions:

1. Flank wear:

Effect: Gradual change in workpiece size into a decrease in surface finish
Reason: the line speed is too high, and the service life of the tool is reached
Measures: Adjust the processing parameters, such as reducing the line speed and changing to inserts with higher wear resistance

⒉Breakdown problem: (bad form of failure)

Effects: Sudden changes in workpiece size or surface finish, resulting in sparking surface burrs
Reason: Inappropriate setting of processing parameters, inappropriate selection of blade material, poor workpiece rigidity, unstable blade clamping
Measures: Check whether the parameter settings are reasonable, and select the corresponding tool according to the workpiece

For more information pls contact us directly, we will reply you within 12 hours.

FAQ:

1. Can I buy sample to test your quality?

Yes, we can provide sample for you to test, after test, you will like the quality.

2.How long the delivery time?

We have large quantity in stock, lead time usually 3-5 days. If run out of stock, only 10 days needed.

Hunan Speed Carbide Tools Co.,Ltd is a professional supplier of Carbide Inserts,Including Turning Inserts，Milling Inserts，Grooving Inserts，Threading Inserts，U drill Inserts，Aluminum Inserts and Cermet inserts etc.Located in Hunan,which is the biggest tungsten carbide tools city near ZCCCT,We provide various and efficient delivery ways,Our factory covers and area of 2,000sqm and has more than 100 staff members who are professional and willing to grow up with you.

We have exported more than 50countries like USA,Italy
,Poland, Mexico, Turkey, Spain, Russia, Brazil, Thailand, India ,Czech Republic
,Pakistan,Iran
etc


What we offer:
1)Furthermore,all of our products are manufactured with advanced equipments and strict QC procedures in order to ensure high quality.
2)100% virgin raw material carbide to make each tool
3)We have rich stock, So very fast delivery
3) Highly competitive prices
4) state-of-art technology products
5) Best professional team of Carbide cutting tools
6) Smooth communication
7) Effective OEM&ODM service